70cm

DVMEGA & BlueStack Boards

DVMEGA & BlueStack-Micro+ Boards

These are the circuit boards that comprise a DVMEGA BlueStack (Android) or iBlueStack (iOS). Either of these BlueStack-Micro+ boards can be paired with either of the DVMEGA radios – the single band or dual band.

These hotspots can operate in two modes:

  • ‘push button out’ for Bluetooth to Android (BlueStack-Micro+) or iOS (new iBlueStack-Micro+) using BlueDV software
  • ‘push button in’ for connection to Raspberry Pi 2/3 or PC using BlueDV, MMDVM, Pi-Star (check availability)

Here is a photo of the dual-band 2m/70cm DVMEGA on BlueStack-Micro+ board connected via cable to USB port on Raspberry Pi 2. This configuration can run BlueDV (Linux), Pi-Star or other MMDVM options.

The software you decide to use will be based on how you prefer to operate in the different modes supported.

With BlueDV software:
Android/Windows PC – DMR/DSTAR/FUSION
iOS – DMR/FUSION (DSTAR not supported due to technical limitations). This version supports background operation for DMR which is an excellent feature.

DVMEGA BlueStack units operating in Bluetooth mode need no computer and run on battery packs for extended periods. Perfect for use with Android and iOS phones/tablets (check versions of phones/tablets for compatibility).

In the UK, these products are available from Karl Powell and now also ML&S. In the Netherlands, from Combitronics.

Thanks! You've already liked this

Pi-Star for Raspberry Pi

Wanting to try out MMDVM on the Pi, I came across a distribution called Pi-Star that is excellent and extremely simple to set up. Brilliant work by Andy Taylor, with responsive Facebook support group.

Have used with a Pi2 and Pi3 in combination with DVMega BlueStack connected via USB for several weeks now.

I have added a Nextion 2.4″ screen that I purchased a while ago but was still sat in its box. Using these instructions, I was up and running displaying modes and callsigns in less than 30 minutes! It connects via the Pi2/Pi3 IO pins. Brilliant.

Update: Pi-Star supports DVMega boards plugged onto Pi2/Pi3 IO pins OR via a BlueStack configuration. If using the DVMega board on the Pi, the Nextion screen will need to connect via USB using this USB 2.0 to TTL Module Serial Converter adapter. If using USB to connect the screen, follow the same instructions above but replace /dev/ttyAMA0 with /dev/ttyUSB0 in the Nextion Port setting of the initialisation file.

Note: The Nextion 2.4″ screen is now available (since July 2017) in the UK from ML&S.

Thanks! You've already liked this
FullSizeRender

Latest Pixel image with 3.5″ screen

The DV4Mini now working extremely well with firmware 1.77.

Created a new build for the Raspberry Pi2 consisting of:
Take either of the latest Pixel images for DV4Mini from:
EA7IYR: http://dv4.es/index.php/2017/03/05/dv4mini-pixel-img-raspberry/
K2DLS: http://www.k2dls.net/blog/2017/03/12/new-raspberry-pi-23-dv4mini-image/

Thanks to EA7IYR and K2DLS for making these images available.

Add the BM XTG from http://www.k2dls.net/blog/2017/04/20/bmxtg-1-2-released/ if not using the K2DLS image.

This system uses the Waveshare/Makibes 320×480 LCD screen:
http://www.waveshare.com/3.5inch-rpi-lcd-a.htm
originally purchased from Amazon https://www.amazon.co.uk/Makibes-Screen-320×480-Designed-Raspberry/dp/B00UV78E9Q/
For Waveshare 3.5″ screen support, I used LCD-show-170309.tar.gz from http://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A).

Thanks! You've already liked this

Connect Systems CS750 DMR Handheld

I’ve had the opportunity to visit Connect Systems, Inc. (in Agoura Hills, CA 91301) a couple of times over the last 12 months and found them to be extremely helpful and knowledgable about their Amateur Radio DMR radios.

I visited this week to catch up on the latest information on their new CS580 and CS760. I ended up with the purchase of a Connect Systems CS750 DMR handheld.

On first impressions, there is a lot to like about the CS750, the build quality, the backlit display and keyboard, front panel programming and the entire contact database in the radio. More feedback once I’ve had hands-on experience with the radio.

Thanks! You've already liked this

Hotspots for DMR, Fusion and DSTAR

I really enjoy these modes via the hotspot and having owned the DV4mini for a year, wanted one that was even more portable so recently purchased a dual band DVMEGA and BlueStack Micro+ combination in a 3D printed custom case. This primarily uses the BlueDV Android or Windows software. Coincidentally I also had a SharkRF OpenSpot on backorder which has now turned up so I will be comparing all three units in the different modes over the coming months. The interface to the OpenSpot is any web browser.

Thanks! You've already liked this

Tytera TYT MD-380 DMR Handheld

I’ve had the Tytera TYT MD-380 DMR Handheld now since last Christmas and now it has the experimental firmware and I update it regularly with the DMR ID database using WH6AV script on the Raspberry Pi, so that names and locations are shown on screen for all operators. This is a really convenient feature. The radio has been excellent, no problems with it or batteries.

Most of the radio use is with internet connected hotspots rather than repeaters. There are two DMR repeaters within 10 miles but I can’t access either from the home QTH. So thats why I first purchased the DV4mini.

Thanks! You've already liked this

12 months on with he DV4mini

Is it already 12 months since purchasing a DV4mini and experimenting with DMR, Fusion and DSTAR.

My DV4mini is now runnning firmware 1.73 and the latest Raspberry Pi version released on 21 November 2016 by Wireless Holdings. I have not experienced the problems some have done with this product, although this latest firmware and software is the best yet. I mainly used this software, but on my compact setup still use the DV4mini-Compact software.

Thanks! You've already liked this

Yaesu FT-60R/E Operating Articles

I uncovered the following articles and helpful advise by other authors. Links are to original content and are the copyright of the author(s).

FT-60R Quick Guide
Controls, Modes, and Programming
Richard Barr Hibbs KI6AQW

Thanks! You've already liked this

Yaesu FT-60R/E Dual Band 2m/70cm Transceiver

Having recently purchased a Yaesu FT-60, which is a great handheld transceiver, I thought there would be a lot of information and advice readily available for planning and programming the memories. Having spent many hours researching this, I will be publishing the best of ‘FT-60’ over the coming posts.

Thanks! You've already liked this